24/7 Emergency Service

0450 024 231

5.0-STAR RATED BY LOCALS

LICENSED & FULLY
INSURED

Gas Fitting Gold Coast: Licensed Gas Fitter for Homes & Businesses

Cooktops, gas hot water, LPG bottles, new lines and leak repairs. One licensed plumber and gas fitter, on the one visit, tested and certified before we leave.

Licensed Gas Fitter
Compliance Certificate
Free Quotes

Smell gas, or need something connected?

Free, upfront quotes, no call-out surprises

Licensed, insured and tidy on every job

Get My Free Quote

We reply within the hour.

Straight up

Gas is the one part of your home where "close enough" isn't good enough. A cooktop connected with the wrong fitting, a regulator on the wrong side of the bottle, or a line that was never pressure tested can sit quietly for years and then become a very bad day. This page covers what to do if you smell gas, what a licensed gas fitter actually does that a general plumber can't, everything we connect and install, the mains versus LPG situation on the Gold Coast, and what compliance paperwork you should be handed at the end.

Walter & Co is a licensed plumber and gas fitter based in Helensvale. Ben holds both licences, which means gas hot water, cooktops and new lines are done by one trade on one visit, tested, certified and tidy.

If it is happening right now

Smell gas? Do this now

Five steps, in order. Do them before you call anyone.

  1. Don't flick any switches. No lights, no fans, no appliances. A spark is the last thing you want.

  2. Open doors and windows and get everyone outside, including pets.

  3. Turn off the gas at the meter (mains) or at the bottle valve (LPG) if you can reach it safely.

  4. Don't go back in to look for the leak.

  5. Call from outside. For a strong smell or a hiss you can hear, call the gas emergency line for your network or 000. Then call us on 0450 024 231. We're available 24/7 for gas emergencies.

A faint smell near an appliance that only appears when it's running is still a leak and still needs fixing today. It just isn't a run-out-of-the-house situation.

Can you smell gas right now?

Get outside first, then call. We are available 24/7 for gas emergencies.

The licence

Why gas work needs a licensed gas fitter (not just a plumber)

In Queensland, gas work is a separate licence from plumbing, issued under the Petroleum and Gas (Production and Safety) Act. A plumber without a gas licence cannot legally connect a cooktop, a hot water unit or a bottle, and any work done without one is uninsured and can't be certified. When you're getting quotes, ask for the gas work licence number. We'll show you ours before we start.

Holding both licences also means we don't have to split a job between two trades. Gas hot water, a kitchen renovation, a new outdoor kitchen: the plumbing and the gas get done together.

Walter & Co ute on site at a Gold Coast job with the tool kit and equipment laid out on the verge

What we connect

Gas fitting services we do

Cooktops, ovens and rangehood gas points

Install and connect new gas cooktops and ovens, replace old ones, convert an electric kitchen to gas where a supply exists, and run a new gas point to wherever the cooktop is going in a renovation. Every connection is pressure tested and certified.

Gas hot water

Storage and continuous flow units, mains or LPG, new install or replacement, including converting from electric. See our hot water systems page for choosing the right unit.

Heaters, fireplaces and outdoor BBQ points

Ducted and space heaters, gas log fires, and the increasingly popular fixed bayonet point on the deck so the BBQ or outdoor kitchen runs off the house supply instead of a swap bottle.

LPG bottle installations and changeovers

A lot of the Gold Coast isn't on mains gas, so the house runs on two 45kg LPG bottles with an automatic changeover regulator. We install and relocate bottle cages, fit regulators and pigtails, and set up the changeover so you don't run out mid-shower. We also convert appliances between natural gas and LPG where the manufacturer allows it.

New gas lines, extensions and relocations

Running a new line for a renovation, extending the existing line to an outdoor area, or relocating the meter or bottles because of a new fence, deck or extension. Copper or approved pex-al-pex, buried to code, sleeved where it needs to be, tested before it's covered.

Leak detection, testing and repairs

Pressure testing the whole system to find a leak, replacing corroded fittings, fixing a regulator that's failed, and clearing a gas appliance that's been condemned by the network until it's repaired and recertified.

Commercial and hospitality gas

Commercial kitchens, cafés, restaurants and clubs: multiple appliances, higher pressures, flexible connections that pass inspection, and the compliance paperwork a lease or council requires. Detail on our commercial plumbing page.

Need something connected?

Tell us the appliance and where it is going. We quote in writing before anything is touched.

Renos and alfresco

Gas for renovations and outdoor living

Two jobs come up constantly on the Coast. The first is the kitchen renovation where the cooktop moves. Moving a gas point isn't just extending a pipe: the line has to be resized if more appliances are being added, isolation valves have to end up somewhere reachable, and the whole run is pressure tested before the cabinetry goes in. Get us in at the same time as the plumbing rough-in, before the tiler and the joiner, and it's a small job. After the benchtop's on, it isn't.

The second is the outdoor kitchen or alfresco. A fixed bayonet point on the deck means the BBQ runs off the house supply, no more swap bottles, and a built-in outdoor kitchen with a cooktop and a fridge can be plumbed and gassed as a proper installation. Outdoor gas has its own rules for clearances, ventilation and weather protection, and appliances have to be rated for outdoor use. We handle the gas, the water and the drainage for the outdoor sink on the one visit.

Continuous flow gas hot water unit and new copper lines run along the outside of a home being renovated

Which one you are on

Mains gas vs LPG on the Gold Coast

Which one you're on depends almost entirely on your suburb and when the estate was built.

Mains (natural) gasLPG bottles
WhereSelected estates and older areas, mostly central and south CoastMost of the northern Coast and hinterland edge, plus anywhere the network hasn't been run
SupplyPiped, metered, never runs outTwo 45kg bottles, swapped or refilled by a supplier
AppliancesNatural gas jetsLPG jets (higher pressure); most appliances convertible
Running costUsually cheaper per unit of energyHigher, plus bottle rental
InstallConnection fee to the network, meter, then internal lineBottle cage, regulator, changeover, internal line
Good forHomes with the network at the boundaryEveryone else, or anyone who wants gas cooking without a network connection

Not sure which you've got? Bottles in a cage at the side of the house means LPG. A meter box with a network dial and no bottles means mains. If you're building or renovating in Helensvale, Pacific Pines or Upper Coomera, check the network availability before you spec gas appliances, because a lot of those estates are LPG only.

Twin LPG bottles in their stands with an automatic changeover regulator mounted on the wall above

Not sure what you are on?

Send us a photo of your meter box or your bottle cage and we will tell you.

Paperwork

Gas compliance: what you get and when you need it

Every piece of gas work in Queensland has to be certified. After we finish, you get a gas compliance certificate (the Form 4 lodged with the regulator) and a compliance plate or label on the installation. You need this for:

  • Selling the house (the buyer's conveyancer will ask)
  • Renting the property (landlord obligations)
  • Insurance claims involving a gas appliance
  • Council or body-corporate approval on a renovation or commercial fit-out
  • Reconnecting supply after the network has isolated the property

If a previous fitter never gave you one, we can inspect, test and certify the existing installation.

Thermann gas storage hot water unit against a brick wall with its gas compliance label fitted

The process

What a gas install involves

  1. Assess the appliance, the supply (mains or LPG), the run and what's needed for airflow and clearances.

  2. Quote in writing before anything is touched.

  3. Run or modify the line, sized correctly so every appliance gets full pressure with everything on at once.

  4. Connect the appliance with the correct fitting, regulator and isolation valve.

  5. Pressure test the whole system and leak test every joint.

  6. Commission the appliance, check the flame, set the regulator, check flue and ventilation.

  7. Certify and hand over the paperwork, then tidy up.

Ready to book it in?

Free quote on site, in writing, before anything is touched.

Keeping it right

Gas appliance servicing

Gas appliances should be serviced about every two years, more often for heaters and older continuous flow hot water units. A service covers cleaning burners and injectors, checking the flame picture and gas pressure, inspecting flues and ventilation, testing safety devices like flame failure and thermocouples, and leak testing every connection. A yellow or lazy flame, soot marks, a pilot that keeps going out, or an appliance that smells when it's running are all reasons to book one sooner. For rentals and commercial premises, a service record is part of the compliance file.

Book a service

Heaters and older continuous flow units are the ones to book first.

From the crew

Five gas safety tips for Gold Coast homes

  1. Check your bottle date. LPG cylinders have a test date stamped on the collar and can't be refilled once it's expired. Swap bottles handle this for you; owned bottles don't.

  2. Keep the bottle cage clear. Nothing stored against it, no ignition sources within a metre, and don't box it in with a new fence.

  3. Don't use an outdoor heater or BBQ indoors or in a closed alfresco. Carbon monoxide doesn't smell.

  4. Get gas appliances serviced every two years. Especially heaters and older continuous flow units.

  5. Replace flexible BBQ hoses when they crack. They live in the sun on the Coast and don't last.

Due for a gas service?

Heaters and older continuous flow units are the ones to book first.

Where we work

Gas fitting across the Gold Coast

We're based in Helensvale and cover the whole Coast. LPG installs, changeovers and conversions are most of our northern work through Helensvale, Oxenford, Pacific Pines, Upper Coomera and Coomera, where mains gas is patchy. Mains connections, kitchen gas points and hot water replacements come up more through Southport, Labrador, Runaway Bay and the estates where the network's been run. Café and restaurant gas fit-outs take us into Surfers Paradise, Broadbeach and Burleigh Heads.

Looking for a gas fitter and plumber near me who'll do both on the one visit, or the best plumber Helensvale has with a gas licence? Give us a call.

Ben and the Walter & Co crew on the mini excavator, with the Gold Coast hinterland behind

FAQs

Frequently asked questions

Answering your gas fitting questions.

Got a gas question? Give us a call or book a free quote today.

Get a Free Quote

Last thing

Licensed, tested, certified

Cooktop, hot water, bottles, a new line or a smell that shouldn't be there: call Ben on 0450 024 231 or use the form below. Licensed plumber and gas fitter based in Helensvale, free quotes, servicing the whole Gold Coast.

Contact information

Cooktop, gas hot water, bottles or a leak? Get in touch and we'll sort it. We answer the phone 24/7 for emergencies.

0450 024 231
Walterandcoplumbing@gmail.com
Gold Coast, QLD and surrounds

Send us a message

Max. 500 characters
By pressing 'Submit' you are explicitly agreeing to our terms and conditions and privacy policy, and consenting to receive text messages. To unsubscribe, text STOP to 0450 024 231.